One Helicoil, commonly referred to as Filet reported, represents an essential element for many professionals who use screw connections.
Its main function is the repair or reinforcement of damaged or worn threads, in various materials such as metal or plastic.
When installed in the receiving threads of the tapped part, the helicoil acts directly on the shear strength. During the installation, theHelicoil is compressed under the effect of the pull exerted by the screw, thus strengthening and securely maintaining your assembly.
The helical is available in 304 stainless steel and is in the form of a spring inserted into a previously tapped hole, creating a new internal thread.
With a larger outer diameter than the original hole, it reinforces the thread. Once in place, theHelicoil offers a new wear-resistant thread, suitable for receiving a bolt or a screw.
Its predominant use is found in materials with low shear strength, such as aluminum or aluminum and magnesium alloys.
One Helicoil In particular, it allows you to:
Available in various threads (metric, UNC, UNF, BSF), the helicoil threaded thread is offered in the form of kits, including options by diameter and varied assortments.
Consult The Gardette Industries catalog is now available to discover a selection of standard threaded threads as well as fine-pitch threads.
It is good to know that a Filet reported is generally made of stainless steel.
Our threaded threads are made from high-strength stainless steel wire that has been formed into a “diamond” section according to precise dimensional standards. Once installed, the attached thread provides a precision female thread with excellent surface finish and high strength (tensile strength of at least 1400 N/mm²).
Made of A2 stainless steel, the Helicoil Free Running guarantee greater resistance to wear and corrosion.
Protection against thread wear: The Free Running Helicoil provides much better resistance in case of frequent loosening and tightening of your assemblies, and this in all possible materials, such as aluminum, magnesium, titanium, titanium, copper, copper, steel, as well as plastic.
Reduced weight and space: thanks to the maximum load capacity of a Helicoil, fewer fixing points are required and screw dimensions can thus be reduced. Saving hardware, installation space and weight while maintaining the same or higher requirements.
Balanced distribution of clamping force: with a Free Running Helicoil, static and dynamic loads are distributed more evenly between the different parts of the net. The flexibility of the added threads compensates for pitch and angle errors in order to obtain an ideal transmission of force between the screw and the thread.
For traditional assemblies and assemblies subject to assembly and disassembly, the Free Running range of helicoil will be recommended.
For assemblies in which the mount must not come loose despite shocks, vibrations, or constant movements, the range ofHelicoil Screw Grip will be advised to you.
Nota bene: our Helicoil are generally compatible with thread inserts, installation tools and taps from other manufacturers.
Indeed, our added threads are standardized (most often according to the din 8140 standard) and therefore have the same dimensions. On the other hand, for some references, we also work according to standards: din 65536, en 2944, ln 9039, ln 9490, ln 9499, ln 9499, ln 9499, nasm 21209, etc.
One Helicoil, commonly referred to as Filet reported, represents an essential element for many professionals who use screw connections.
Its main function is the repair or reinforcement of damaged or worn threads, in various materials such as metal or plastic.
When installed in the receiving threads of the tapped part, the helicoil acts directly on the shear strength. During the installation, theHelicoil is compressed under the effect of the pull exerted by the screw, thus strengthening and securely maintaining your assembly.
The helical is available in 304 stainless steel and is in the form of a spring inserted into a previously tapped hole, creating a new internal thread.
With a larger outer diameter than the original hole, it reinforces the thread. Once in place, theHelicoil offers a new wear-resistant thread, suitable for receiving a bolt or a screw.
Its predominant use is found in materials with low shear strength, such as aluminum or aluminum and magnesium alloys.
One Helicoil In particular, it allows you to:
Available in various threads (metric, UNC, UNF, BSF), the helicoil threaded thread is offered in the form of kits, including options by diameter and varied assortments.
Consult The Gardette Industries catalog is now available to discover a selection of standard threaded threads as well as fine-pitch threads.
It is good to know that a Filet reported is generally made of stainless steel.
Our threaded threads are made from high-strength stainless steel wire that has been formed into a “diamond” section according to precise dimensional standards. Once installed, the attached thread provides a precision female thread with excellent surface finish and high strength (tensile strength of at least 1400 N/mm²).
Made of A2 stainless steel, the Helicoil Free Running guarantee greater resistance to wear and corrosion.
Protection against thread wear: The Free Running Helicoil provides much better resistance in case of frequent loosening and tightening of your assemblies, and this in all possible materials, such as aluminum, magnesium, titanium, titanium, copper, copper, steel, as well as plastic.
Reduced weight and space: thanks to the maximum load capacity of a Helicoil, fewer fixing points are required and screw dimensions can thus be reduced. Saving hardware, installation space and weight while maintaining the same or higher requirements.
Balanced distribution of clamping force: with a Free Running Helicoil, static and dynamic loads are distributed more evenly between the different parts of the net. The flexibility of the added threads compensates for pitch and angle errors in order to obtain an ideal transmission of force between the screw and the thread.
For traditional assemblies and assemblies subject to assembly and disassembly, the Free Running range of helicoil will be recommended.
For assemblies in which the mount must not come loose despite shocks, vibrations, or constant movements, the range ofHelicoil Screw Grip will be advised to you.
Nota bene: our Helicoil are generally compatible with thread inserts, installation tools and taps from other manufacturers.
Indeed, our added threads are standardized (most often according to the din 8140 standard) and therefore have the same dimensions. On the other hand, for some references, we also work according to standards: din 65536, en 2944, ln 9039, ln 9490, ln 9499, ln 9499, ln 9499, nasm 21209, etc.
Our sales department is available from Monday to Thursday from 8:30 to 12:00 and from 13:30 to 17:00 and on Friday from 8:30 to 12:00 and from 13:30 to 16:30.
In all our offers and acknowledgements of receipt (AR), we explicitly mention departure times.
We are certified according to ITAF 16 949 and ISO 9001 standards
We specialize in the manufacture of a wide range of keys and special parts. Our expertise extends to all fixing and assembly elements.
The company has 60 professionals divided into various categories, including technicians, engineers, support functions, sales representatives and management members.
